Search

Home » DIY Tutorials » DIY Crafting » Fox/Bear/Raccoon DIY Stenciled Onesies (…with tails on the back!)

Fox/Bear/Raccoon DIY Stenciled Onesies (…with tails on the back!)

Oh boy, oh boy…..do I have a fun BOY PROJECT for you today!!!  (Okay, okay, this could work for either gender….but we’re going to call it a “boy project” since I’m having a baby boy in a couple months and frankly, boy projects are a little less common in the big vast blog land!)

But oh gosh guys, these are the sweetest little Fox/Bear/Raccoon DIY Stenciled Onesies….that are also so fun to make!  As I was creating the templates on my computer and then started adding the paint to bring them to life, I couldn’t stop gushing over these cute woodland creatures.  It got me all excited for this little guy to hurry and finish baking inside my belly and meet the world!

But the BEST PART?!  The bum of each onesie!!!  I can’t be alone in this…..but little diapered baby bums are kind of my favorite!  Especially newborn bums that sit entirely in your hand (or the bend of your elbow) as that little baby lays on your chest, snuggled into your neck.  And that’s why I had to add a little something to the bum of these onesies.

Fox, Bear & Raccoon DIY Stenciled Onesies (...with tails on the back!) | via makeit-loveit.com
  • Save

Ha!  Didn’t those turn out fun?!  (A bear tail is more or less a circle, which seemed kinda boring, so I added words to that one instead of a tail!)

 

But, I must confess, these onesies will have to be re-made for my little buddy….because I gave this first set away to a sweet friend who lives here in Oklahoma, who is having her very first baby.  I joined a few friends and helped throw her a baby shower, and had so much fun thinking about ALL THINGS BOY!

The onesies work great as a baby gift (if you don’t have a baby of your own), but also make great decor for a baby shower.  I hung each of the onesies (along with some jeans, plaid shirt, and suspenders) from some twine, and hung it across my mantel.  Once the shower was over…..the decor was sent home with her, as a baby gift!  Perfect!

Fox, Bear & Raccoon DIY Stenciled Onesies (...with tails on the back!) | via makeit-loveit.com
  • Save

 

These stencils can be added to Tshirts too, not just onesies.  (And would even be fun on a canvas for some wall art.)  The paint I used is non-toxic and washes/dries well….even though after time, it will fade just a bit (but not enough to really notice or care).

My original favorite was the fox!  (Just think about that little tail peeking out from a pair of paints too.  How funny, right?)

Fox, Bear & Raccoon DIY Stenciled Onesies (...with tails on the back!) | via makeit-loveit.com
  • Save

 

But then I made this raccoon and decided he tied for first!  (Again….that tail! Aggh!)

Fox, Bear & Raccoon DIY Stenciled Onesies (...with tails on the back!) | via makeit-loveit.com
  • Save

 

But then because I feel like I have to make things in groups of odd numbers, I made this little bear to complete the set…..and love him just as much!  Especially the little BEAR BUM on the back! :)

Fox, Bear & Raccoon DIY Stenciled Onesies (...with tails on the back!) | via makeit-loveit.com
  • Save

 

So much fun to make for your own baby…..but possibly even more fun to give away!

Fox, Bear & Raccoon DIY Stenciled Onesies (...with tails on the back!) | via makeit-loveit.com
  • Save

 

And then because I couldn’t resist, I matched them up with some of the clothes.  Perfect with suspenders, right??

Fox, Bear & Raccoon DIY Stenciled Onesies (...with tails on the back!) | via makeit-loveit.com
  • Save

 

Or how about this plaid shirt?!  Equally cute!

Fox, Bear & Raccoon DIY Stenciled Onesies (...with tails on the back!) | via makeit-loveit.com
  • Save

 

Okay, I could gush over baby clothes All. Day. Long.  So I better stop!

Anyway, would you like to make some of these Woodland Creature Onesies too??

Great!  Let me show you how…

 

SUPPLIES for Stenciled Onesies:

 

To make the Fox Onesie, print off the template from above and then you can either trace around the top shape (which includes the “SLY FOX” lettering) and then use an Exacto knife to cut it out (HERE’S an example of that technique)……OR, if you have a Silhouette Craft Cutter, you can load the file into your Silhouette program and use the trace tool to trace around the shape and then have it cut out.  (I used my Silhouette this time but I have used both techniques.)

Then iron the freezer paper stencil (glossy side down) onto your onesie.  Apply orange acrylic paint within the stencil boundaries with a sponge brush.  As you’re painting, just blot the brush onto the fabric in an up-and-down motion rather than puling it across the fabric, so you don’t stretch the fabric or pull the stencil off the fabric.  (Also, be sure to place a piece of cardboard or something between the onesie layers, so the paint doesn’t leak through.)

  • Save

 

Let the orange paint dry completely.  (I use a hairdryer to speed things up.)

Now, cut out the stencil for the inner shape of the fox’s face, from the file above, and iron it down on the inside of the fox head. (The freezer paper doesn’t iron down quite as easy onto the paint…but just do the best you can.  If it will only iron down partially or not at all, just hold the stencil in place while blotting the paint down with the sponge brush.)

Then use a very light orange (I mixed my orange with white to create a light orange I liked) and then blot it on top of the darker orange along the bottom half of the fox face.

  • Save

 

Do the same with some brown paint, within the ear shapes.

  • Save

 

Now, peel the outer freezer paper from the fabric…

  • Save

 

…as well as the smaller piece of freezer paper.

  • Save

 

Use a small paint brush and add a little triangle nose and 2 small eyes (and a mouth).

  • Save

 

Once the paint is dry, place a thin layer of fabric on top of the paint, and then press with a hot iron….to help set the paint.

Here’s the fox, all complete!  How cute is he?!?!

  • Save

 

Now, the tail is optional….but why not add it?  It’s just too cute!

Cut out the tail stencil from the file above, iron it down onto the back of the onesie, and then blot your orange paint onto the fabric, within the stencil boundaries.

  • Save

 

Once the orange is dry, use a small paintbrush and create a little dark brown tip for the tail.

  • Save

  • Save

 

Peel the freezer paper off…..and your tail is done!!!  (Just heat set with an iron, just like you did with the front of the onesie.)

  • Save

 

To create the raccoon, print off the file from the supply list above.  Iron it down the same way as you did with the fox, and add your grey paint.  Then, once the paint has dried, add the inner stencil pieces and try your best to iron it down.

  • Save

 

Then, add dark grey paint to the inside of the inner stencils.  Peel off the freezer paper, let dry, and then add eyes, nose, and a mouth.

  • Save

 

Once the paint is dry, place a thin layer of fabric on top of the paint, and then press with a hot iron….to help set the paint.

Here’s that cute little raccoon, all complete! :)

  • Save

 

For the tail, do the same as the fox tail above.  Paint the entire thing with the lighter grey, let dry, and then blot down some stripes with the darker grey paint.  Peel off the freezer paper…and that’s it! (Just heat set with an iron, just like you did with the front of the onesie.)

  • Save

 

To create the bear, print off the file from the supply list above.  Iron it down the same way as you did with the fox and raccoon, and add your brown paint.  Then, once the paint has dried, add the inner stencil pieces and try your best to iron it down.  Add light brown paint to create the inner ear and muzzle.

  • Save

 

Peel off all the freezer paper and then add your eyes, nose, and mouth with black paint.

  • Save

 

Once the paint is dry, place a thin layer of fabric on top of the paint, and then press with a hot iron….to help set the paint.

And your bear is done!! :)

  • Save

 

Instead of a bear tail (which I thought would be a little boring, since it would just be a circle), I created the words BEAR BUM with a little heart! :)  Iron down the stencil piece and add your paint, just like the steps above.  (Don’t forget to heat set with an iron, just like you did with the front of the onesie.)

  • Save

 

Now your Fox, Raccoon, and Bear onesies are ready to be worn by your favorite little one! :)

  • Save
  • Save
  • Save

 

Enjoy!

-Ashley

 

Save

Save

Ashley Johnston

Administrator at Make It & Love It
Ashley Johnston is a professional DIY costume maker, sewist, crafter, and owner of Make It & Love It. She is a mom of 5 and a wife to a very patient (with the craft clutter) husband. In case you’re wondering, she always chooses crafting/sewing/designing over mopping/dusting/wiping base boards……but bathrooms/laundry/full bellies are always attended to. Whew!

  • Save

Hi, I'm Ashley

Hi, I’m Ashley—the DIY-enthusiast behind this crazy blog!

Back to Top
3.1K Shares
Share via
Copy link