Be sure and vote on the “What Do YOU Want to Make” poll going on right now. And just as a head’s up (and because the poll isn’t showing the results like I thought they would), the leading 3 projects right now are the Maxi Dress, the Kid’s Play Tent, and the Purse.
. . . . .
If you noticed several weeks ago, when I was showing pictures of Connor’s room (his Wood Plank Headboard and his Pleated Bed Skirt), I had a couple of throw pillows on his bed. It’s funny because from the moment I placed that “STOP” pillow on Connor’s bed……..Steve and I looked at each other and thought, “doesn’t that contradict with the SOAR above his headboard?” I know, such a silly thing to worry about, but it bugged us right away. The pillow only sat on his bed for, oh, 20 minutes……and then I decided to take it back. Boo.
However, I decided he still needed something……so, yep, sewing machine to the rescue. Again. :)
So we went with an Airplane and USA Map pillows. Both with an envelope closure in the back (like a slip cover, so I can slip them off and wash them when needed).
The pop of color is perfect for his bed. And well, the plane and map are perfect for Connor….and go great with his decor. And luckily, he thinks they are the coolest pillows ever. (These kids are so easy to please at this age!)
Want to make some too?
Well, let’s hop to it.
- Pillow insert (any size)
- 1/2 – 1 yard (depending on pillow size) of fabric (cotton, upholstery, etc.)
- Fusible Interfacing (if using a thinner fabric) (What is Fusible Interfacing??)
- Scraps of cotton fabric for airplane and map
- Fusible Adhesive (What is Fusible Adhesive??)
- Templates for airplane and map (FOUND HERE)
First of all, measure your pillow insert. Add 1/2 inch to those measurements. (We will be using a 1/2 inch seam allowance down below, so you may be thinking we need to add an extra inch so that all sides have an extra 1/2 inch. However, I like the cover to be a little more snug……so we’re only going with an extra 1/4 inch around all edges. Make sense?)
Then cut a front piece out of your main fabric at those dimensions. (The piece on the left reflects those measurements…..because my pillow insert is 12 x 22 inches.) Then, divide the width of your pillow by two and then add 3.5 inches and then add 1/2 inch to the height measurement just like above…..and that will give you the measurement for your two back pieces that will overlap for an envelope closure.
If you’re using a thin woven cotton fabric (like I did), fuse some interfacing to the back side of each of your 3 fabric pieces. This will help stiffen up your fabric (and keep it from being see-through).
Next, iron some fusible adhesive to the “wrong” side of your fabric that you’re using for your shapes. Draw your desired shape or use my airplane and/or USA map template (link above). Cut your shape out and then trace onto the paper side of your fusible adhesive. (Be sure to trace the mirror image of your shape if it’s isn’t symmetrical….like the map.)
Cut out your shape and then peel the paper backing off.
Place the shape onto your front pillow piece, with the adhesive side of your shape facing down. Center your shape right where you want it. If you want to add the corner pieces like I did, cut some squares (mine were 4 inch squares) and then cut them in half diagonally and place at each corner.
Iron your fabric shapes down (according to your package instructions) and then stitch around the edges of your shapes with a straight stitch. A zig-zag stitch would work too…..but I really wanted a straight-line detail for this project.
Now, grab your two back pieces to your pillow and fold one of the shorter ends of each piece under a 1/2 inch, another 1/2 inch and then sew in place.
Place your pillow front down in front of you, face up. Place the 2 back pieces face down, overlapping the 2 finished edges at the center of the pillow…..and match up all of the other corners and edges.
Pin in place……and then sew all the way around, using a 1/2 inch seam allowance. Clip the 4 corners and then serge or zig-zag the raw edges.
Turn right side out, pole each corner out, and then iron your pillow cover flat.
Stuff your insert inside……and you’re all set!
Now, enjoy your new pillow(s)!
. . . . . . . . . . . . . . . .