Search

Home » DIY Tutorials » DIY Sewing » Sewing: Clothing » Baby Clothing » Felt Toy Truck – Little Boy Gift Idea

Felt Toy Truck – Little Boy Gift Idea

  .
Remember how book giving is on the Christmas-gift-list this year?  
(Check out my girl book/gift idea here.)
Well, my little boy will get a personalized little gift with his new books too.
We checked out The Three Little Rigs (by David Gordon) from the library a few weeks ago….
He ab-so-lute-ly fell in love with the book.  And loved reciting parts of it as I read it to him.  We returned the book to the library so that other kids could borrow the book…..and he was crushed.

So I hurried over to amazon.com and ordered it for Christmas.
(And I think paid $0.24 because it was used but in ‘like new’ condition.  Plus shipping.  Great deal.)

And to accompany his new little truck book, a plush little friend……..
 **I’m sure there are plenty of girl truck lovers out there too…….so this would be just as cute for your little girl.
And you know, there were plenty of other books that I couldn’t help but plop into the Amazon shopping cart.  Trucks seem to be one of his little boy passions lately.
The soft truck was created with headlight eyes and a front grill smile.
What a great new buddy to read his books with.
Sometimes a little homemade gift is a perfect match for new books.
. . . . . . . . . . . 
Would you like to make your own felt truck?

You’ll need to start by drawing out a basic side shape for your truck.  Cut it out of paper and use it as a pattern to cut out 2 pieces of felt in whatever color you’d like.  (I used all straight edges and and used a ruler to help me keep the edges even and precise.)  Then, cut out a long strip that’s as wide as you’d like the width of the truck to be and long enough to go all the way down and around the center of the truck shape.
(My paper pattern piece for the truck side pieces measured about 6.5 inches tall and 10.5 inches wide.  The center strip measured about 6 inches wide and 34 inches long.  That may help if you’re trying to make one in a similar size.)
Then, lay your strip down under your machine needle, several inches from the end.   Then, place the bottom edge of the truck under the needle as well and line it up with the edge of the long strip.  Begin sewing along the bottom of the truck, starting your stitch about in the middle of the bottom of the truck.  (Use 1/4 inch seam allowance.)
**Keep in mind that you will always keep the long strip straight up and down under the needls and won’t ever curve it or turn it as you’re sewing.  You will only be manipulating the truck piece and will move it as you go.  But keep that bottom strip lined up, while using a 1/4 inch seam allowance.
When you get to the first corner, stop a 1/4 inch from the bottom edge then pull your truck shape, pivoting the fabric around the needle…….
……..and keep pulling it and arranging it until that next edge is lined up with the bottom strip.  It is essential that you stopped 1/4 inch from the edge in the last step, before you turned your truck shape, so that the fabric will line up in this step.
Use a pin (or something small) to help that corner lay flat before continuing to sew.
Then continue to sew around the next corner the same way as the first.  
Then when you get to a corner that is inverted like this one…….
……pass the bottom edge a 1/4 inch……
……..then start pulling the top fabric over and down so that it will line up with the strip below, that is still lined up straight up and down.
Here it is all lined up on the right edge with a bit of manipulated fabric above.
Continue around the rest of the corners the same way.  Then stop about a 1/2 inch from where you started with the other end and leave your tail of fabric.  Here’s what it should look like.
Then flip your truckover with the sewn edge facing down, and place your second truck shape on top.  Pin the bottom edge where you’ll be starting your next seam, making sure to match up this side directly opposite the other side.  If you don’t match this side up just how the other side is, your truck will turn out all funky and twisted.
Sew all the way around the other edge the same way, making sure to place the strip side on the bottom and only move the side truck shape as you sew all the way around again.  Leave the bottom open in the same way.
On each side of the truck, the corners that are inverted will pull funny after turning it right side out without clipping it first.  So clip right in the corners, making sure to not clip through the seam.
Then turn your truck right side out, poke out the corners and stuff with batting.  If you’re truck is lumpy, move the batting around and shove more in there to even it out.
Then tuck the raw ends towards the inside and hand-stitch it closed.  
(Need help with hand-stitching?  Click here.)
Next, the tires.  
I made big front tires and small back tires……more like a semi truck with a flat bed.
So I found circle cups in my house to create 2 large front tires and 4 smaller back tires.  I sewed all the way around the circles, except for an opening along one side.  Then I turned them right side out………..
…….and shoved them with batting.
Then I hand-stitched the opening closed.
(Need help with hand-stitching?  Click here.)
Then I created smaller circles in a grey color and cut out little half circles all the way around each circle.  
I was trying to create a hub cab look.
Then I used a needle and tread to secure each tire to the sides of the truck.  I then hot glued the hub caps to the tire but hand-stitching would work well too.
Finally, I created eyes, eyebrows, and a curved grill shape for the mouth……all with felt.  I used glue and hand-stitching to attach the pieces to the front of the truck.  (I didn’t actually hand-stitch all the pieces….but it’s up to you.)
I also created front windshields out of rectangle pieces of felt and then a side smoke stick thing-y for the side.  What’s that thing called?  Anyone?
Make sure to personalize your truck and make it look like one in a book or just how your little guy (or even girl) would like it.
And that’s it.
All ready to be loved on and squished………while reading the new books.
 
  • Save



Ashley Johnston

Administrator at Make It & Love It
Ashley Johnston is a professional DIY costume maker, sewist, crafter, and owner of Make It & Love It. She is a mom of 5 and a wife to a very patient (with the craft clutter) husband. In case you’re wondering, she always chooses crafting/sewing/designing over mopping/dusting/wiping base boards……but bathrooms/laundry/full bellies are always attended to. Whew!

  • Save

Hi, I'm Ashley

Hi, I’m Ashley—the DIY-enthusiast behind this crazy blog!

Back to Top
282 Shares
Share via
Copy link